Publikationsliste des Lehrstuhl FUW
- 2019
80.
Schmidtseifer, N.; Weber, S.
Handling of Blackplate in Metallographic Preparation and Heat Treatment Optimization via Quenching Dilatometry
Practical Metallography, 56 (1) :34--47
2019
ISSN: 0032-678X79.
Blüm, M.; Kronenberg, P.; Peschke, I.; Weber, S.
Legieren von Cu-Basis Werkstoffen während der additiven Fertigung
Werkstoffe und Bauteile auf dem Prüfstand, Seite 165--173
Herausgeber: {Stahlinstitut VDEh}, Düsseldorf
2019ISBN: 9783883554181
78.
Egels, G.; Fussik, R.; Weber, S.; Theisen, W.
On the role of nitrogen on hydrogen environment embrittlement of high-interstitial austenitic CrMnC(N) steels
International Journal of Hydrogen Energy, 44 (60) :32323--32331
2019
ISSN: 0360319977.
Blüm, M.; Weber, S.
Optimierung der Wärmebehandlung karbidreicher Stähle durch Thermodynamische Berechnungen
Forum Schneidwerkzeug- und Schleiftechnik, 32 (2) :80--81
201976.
Schwarz, P.; Deuerler, F.; Weber, S.
Production and investigation of the wear behavior of inductively melted hardpaint coatings
Materialwissenschaft und Werkstofftechnik, 50 (10) :1196--1206
2019
ISSN: 0933513775.
Izawa, C.; Wagner, S.; Deutges, M.; Martín, M.; Weber, S.; Pargeter, R.; Michler, T.; Gemma, R.; Pundt, A.
Relationship between hydrogen embrittlement and Md30 temperature: Prediction of low-nickel austenitic stainless steel's resistance
International Journal of Hydrogen Energy, 44 (45) :25064--25075
2019
ISSN: 0360319974.
Izawa, C.; Wagner, S.; Deutges, M.; Martín, M.; Weber, S.; Pargeter, R.; Michler, T.; Uchida, Haru-Hisa; Gemma, R.; Pundt, A.
Role of surface oxide layers in the hydrogen embrittlement of austenitic stainless steels: A TOF-SIMS study
Acta Materialia, 180 :329--340
2019
ISSN: 1359645473.
Kernebeck, S.; Deuerler, F.; Weber, S.
Untersuchung der einsatzbedingten Diffusionsreaktion am Beispiel der Kathodenseite einer Al-Elektrolysezelle
In Petzow, Günter and Neidel, Andreas, Editor, Fortschritte in der Metallographie aus Sonderbände der Praktischen Metallographie
Seite 67--72
Herausgeber: {Inventum GmbH}, Sankt Augustin
2019
67--72ISBN: 978-3-88355-417-4
- 2018
72.
Schwarz, P.; Deuerler, F.; Weber, S.; Peterseim, J.
Analysis of the Micro-Processes Occurring on Different Wear Protection Layers under Abrasive and Impact Wear using Laser Scanning Microscopy
Practical Metallography, 55 (11) :762--772
2018
ISSN: 0032-678X71.
Leich, L.; Röttger, A.; Theisen, W.; Krengel, M.
Densification of nanocrystalline NdFeB magnets processed by electro-discharge sintering -- Microstructure, magnetic, and mechanical properties
Journal of Magnetism and Magnetic Materials, 460 :454--460
2018
ISSN: 0304-885370.
Fussik, R.; Weber, S.
Derivation of Property Distribution Images from Microstructural Analyses of X2CrNi18-9 with Regard to Hydrogen Embrittlement
Practical Metallography, 55 (6) :387--399
2018
ISSN: 0032-678X69.
Lentz, J.; Röttger, A.; Großwendt, F.; Theisen, W.
Enhancement of hardness, modulus and fracture toughness of the tetragonal (Fe,Cr)2B and orthorhombic (Cr,Fe)2B phases with addition of Cr
Materials {\&} Design, 156 :113--124
2018
ISSN: 0264127568.
Blüm, M.; Theisen, W.; Weber, S.
Experimental and Numerical Investigations on Interdiffusion Profiles in Compounds Produced by Sinter-Cladding
Metallurgical and Materials Transactions A, 49 (10) :4991--5000
2018
ISSN: 1543-194067.
Krell, J.; Röttger, A.; Geenen, K.; Theisen, W.
General investigations on processing tool steel X40CrMoV5-1 with selective laser melting
Journal of Materials Processing Technology, 255 :679--688
2018
ISSN: 0924013666.
Lentz, J.; Röttger, A.; Theisen, W.
Hardness and modulus of Fe2B, Fe3(C,B), and Fe23(C,B)6 borides and carboborides in the Fe-C-B system
Materials Characterization, 135 :192--202
2018
ISSN: 1044-580365.
Egels, G.; Mujica Roncery, L.; Fussik, R.; Theisen, W.; Weber, S.
Impact of chemical inhomogeneities on local material properties and hydrogen environment embrittlement in AISI 304L steels
International Journal of Hydrogen Energy, 43 (10) :5206--5216
2018
ISSN: 0360319964.
Kernebeck, S.; Weber, S.
Influence of Short-Term Heat Treatment on the Mechanical Properties of Al–Mg–Si Profiles
Metals, 8 (9) :664
201863.
Küpferle, J.; Zizka, Z.; Schoesser, B.; Röttger, A.; Alber, M.; Thewes, M.; Theisen, W.
Influence of the slurry-stabilized tunnel face on shield TBM tool wear regarding the soil mechanical changes -- Experimental evidence of changes in the tribological system
Tunnelling and Underground Space Technology, 74 :206--216
2018
ISSN: 0886779862.
Mutke, C.; Geenen, K.; Röttger, A.; Theisen, W.
Interaction between laser radiation and metallic powder of 316L austenitic steel during selective laser melting
Materials Characterization, 145 :337--346
2018
ISSN: 1044-580361.
Fussik, R.; Walter, M.; Theisen, W.; Weber, S.
Investigation of austenitic FeCrNi steels with regard to stacking-fault energy and thermal austenite stability
Materialia, 3 :265--273
2018
ISSN: 2589152960.
Fussik, R.; Egels, G.; Theisen, W.; Weber, S.
Investigation of the Local Austenite Stability Related to Hydrogen Environment Embrittlement of Austenitic Stainless Steels
THERMEC 2018, 941 :263--268
2018
ISSN: 0357-120859.
Wawoczny, D.; Schneider, M.; Weber, S.
Material Behaviour of L-PBF 316L Processed in Nitrogen
CFI/Ber. DKG 95 (08) :19--25
201858.
Boes, J.; Röttger, A.; Mutke, C.; Escher, C.; Theisen, W.
Microstructure and mechanical properties of X65MoCrWV3-2 cold-work tool steel produced by selective laser melting
Additive Manufacturing, 23 :170--180
2018
ISSN: 2214-860457.
Windmann, M.; Opitz, T.; Klein, S.; Röttger, A.; Theisen, W.
Mn-Alloyed High-Strength Steels with a Reduced Austenitization Temperature: Thermodynamic Calculations and Experimental Investigations
steel research international, 89 (11) :1800166
2018
ISSN: 1611368356.
Wawoczny, D.; Weber, S.; Schneider, M.
Statische Festigkeit eines additiv gefertigten 316Lnach dem Lösungsglühen
Prozesswärme (08) :59--65
2018
